| 价格 | 面议 |
| 发货 | 境外美国 |
| 品牌 | SPINEA |
| 该产品库存不足 |
SPINEA TwinSpin T-series high-precision reduction gear, size TS 60 and ratio 35:1. No custom ordering code is inferred.
| Reducer type | TwinSpin T-series high-precision reduction gear with integrated radial and axial cylindrical roller bearings |
|---|---|
| Reduction ratio | 35:1 |
| Rated torque | 37 Nm (rating table load at output speed 15 rpm; nominal operating temperature) |
| Peak torque | 74 Nm acceleration/braking torque; distinct from emergency-stop torque |
| Allowable moment | 107 Nm max tilting moment (Fa=0; load table at output speed 15 rpm) |
| Backlash | <1.5 arcmin maximum lost motion |
| Torsional stiffness | 3.5 Nm/arcmin (depends on version, ratio and lost motion) |
| Input speed | 2000 rpm rated input speed |
| Weight | 0.86 kg (informative; exact value depends on configuration) |
| Allowable radial load | 2600 N (rating table at output speed 15 rpm) |
| Allowable axial load | 3700 N (Mc=0) |
| Product model | TwinSpin T series TS 60, ratio 35 |
| Permissible emergency-stop torque | 185 Nm |
|---|---|
| Cycle-effective speed | 3000 rpm |
| Maximum allowable input speed | 4000 rpm (duty-cycle dependent; consult manufacturer) |
| Average angular transmission error | ±36 arcsec |
| Hysteresis | <1.5 arcmin |
| Tilting stiffness | 27 Nm/arcmin (version-dependent) |
| Maximum no-load starting torque | 0.16 Nm |
| Maximum back-driving torque | 9 Nm |
| Input inertia | 0.006 × 10^-4 kg·m² (informative; configuration-dependent) |
| Configuration note | TS 60 ratio 35 is listed in the T series; case version TB. Motor flange and shaft configuration vary; no full custom ordering code inferred. |
Source: https://www.spinea.com/en/products/twinspin/t-series
