| 价格 | 面议 |
| 发货 | 全国 |
| 品牌 | EngineAI Robotics |
| 该产品库存不足 |
The EngineAI T800 Pro is a full-size humanoid robot for industrial and commercial deployment. The official product page describes the Pro configuration; the development guide supplies the configuration-specific table below.
Official product page: https://en.engineai.com.cn/product-t800.html
Official specifications: https://en.engineai.com.cn/open/docs/t800/t800/robot-specifications-electrical-interfaces?entry=docs
| Product model | T800 Pro Version |
|---|---|
| Overall height | 1730 mm |
| Standing height | 1730 mm |
| Robot weight | Approx. 85.3 kg (with battery; Pro Edition) |
| Degrees of freedom | 29 body DOF + 14 dexterous-hand DOF (43 total; Pro Edition) |
| Payload | Whole-robot payload not specified; hand payload 5 kg per hand (manufacturer stated) |
| Runtime | 4 h continuous on product page; development guide lists 2 h standard battery life |
| Battery capacity | 1220 Wh (1.22 kWh) |
| Dimensions | 1730 mm height; full L × W × H not specified |
| Operating temperature | -10 to 40 °C |
| Technical extension parameters | Pro Edition perception: ultra-wide-field binocular camera and 3D LiDAR. Up to 450 N·m peak joint torque; 20° maximum traversable slope; 20 cm step-over; 64 GB AGX Orin (upgradable on request); battery and configuration may change published weight. |
| Walking / running speed | Forward 0–1.5 m/s; reverse 0–0.8 m/s; lateral 0–0.5 m/s; running <3 m/s. |
The manufacturer notes that parameters can vary by configuration and use scenario. The 5 kg hand payload is specifically for each dexterous hand, not a whole-robot payload rating. Battery-life and mass values are identified by the source edition.
