The Basler ace 2 R a2A1920-51gmBAS is a monochrome area-scan camera equipped with a Sony IMX392LQR-C sensor. The manufacturer lists a default resolution of 1920 × 1200 pixels and a full resolution of 1936 × 1216 pixels; frame rate is 51 fps at default settings. Localized image note: the Basler ace 2 BAS GigE mono camera image is representative of the family and is not asserted to uniquely show this exact model suffix.
Standard specifications
| Product model | a2A1920-51gmBAS |
|---|---|
| Vision type | 2D_area_scan |
| Image sensor | Sony IMX392LQR-C, progressive-scan CMOS, global shutter |
| Resolution | 1920 × 1200 pixels (default); 1936 × 1216 pixels (full resolution); 2.3 MP |
| Frame rate | 51 fps at default settings |
| Data interface | GigE |
| Trigger mode | hardware |
| Lens mount | C-mount |
| Ingress protection | IP30 |
| Operating temperature | Housing temperature during operation: −10 to 60 °C (not an ambient-temperature rating) |
| Dimensions | 48.9 × 29 × 29 mm without lens mount/connectors; 62.2 × 29 × 29 mm with lens mount/connectors |
| Weight | <0.100 kg |
| Certification | CE |
| SDK | Basler pylon Software Suite 6.0 or higher |
Source-specific technical extensions
| Pixel-size specification | 3.45 × 3.45 µm (horizontal × vertical) |
|---|---|
| Sensor-format detail | 1/2.3-inch format; effective sensor diagonal 7.9 mm |
| Interface and stream protocol | Gigabit Ethernet (1000 Mbit/s) and Fast Ethernet (100 Mbit/s); image stream protocol GVSP |
| Additional synchronization modes | Manufacturer lists hardware trigger, software trigger, and free run; the standard selector is mapped to the verified hardware-trigger enum |
| Power requirements | Typical ≈4.2 W via PoE; typical ≈3 W when supplied at 12–24 VDC via I/O connector |
| I/O lines | 1 opto-coupled input line and 2 general-purpose I/O (GPIO) lines |
| Environmental conditions | Operating humidity: 20–80% relative, non-condensing. Housing temperature is distinct from the UL ambient limit (max. 30 °C). |
| Supported software platforms | Basler pylon Software Suite v6.0 or higher; Windows, Linux x86, Linux ARM, macOS, and Android |
Source: Basler official English model documentation.
